SPEED|
UP TO 30 MPH
RANGE|
UP TO 80 MILES
BATTERY|
48V 21AH
SENADA HERALD PRO
Motor
Battery
Max Range
Charging Time
Max Load
Speed
With a step-through design, you can easily get on and off the bike without a high step.
creating a step-through frame opens up the roads to everyone! For those who may have limitations preventing them from hopping on a traditional bike or simply prefer having frameoptions, Level.2 Step-through makes it easy for everyone tosaddle up and get out there!
Conquer the toughest jobs and extended backcountry adventures with the HERALD's powerful 1000w motor, 48v 21Ah long-range battery, and industry-leading hauling and towing capacity.
It climbs like a beast and is very stable,100mm front mozo suspension provides unparalleled control and comfort on the toughest trails.
High-quality 26" x 4" tires for tackling diverse terrains, from soft sand and snow to hardpack trails and rocks.
SENADA ebike equips with 48V 21Ah lithium-ion battery with a LARGE CAPACITY of 1008Wh. The high-capacity endurance is enough for long-distance exploration and round-trip travel.
【330 LBS Payload Capacity】HERALD is framed by 6061 ALUMINUM which bring more RELIABLE SAFETY SYSTEM than other brands, the bike weighs 78 lbs, but you can carry a lot of bulky items or cargo (within 330 lbs total weight) and go wherever you want, commute or adventure.
Charging time: about 10-11 hours, you can also bring the battery to your home or office to recharge. Full-charge range: 45-80 miles, depending on whether you use more pedal-assisted power or more throttle power.
Our ebikes are crafted with strict production standards and undergo meticulous quality control, From robust frames to reliable battery systems, every detail is thoughtfully considered to ensure your safety.
【2-Year Warrantly and Lifetime Service】 "Keep conatct and say no to problems" is our purpose. All senada ebike come with a 2-year all-inclusive warranty against all manufacturing defects.
Specifications
Bike Dimension
What's In The Box
- A - Stem to Saddle 25.6'' / 65cm
- B - Wheel Base 49.2'' / 125cm
- C - Total Length 78' / 198cm
- D - Wheel Diameter 28.7'' / 73cm
- E - Handlebar Height42.5'' / 108cm
- F - Seat Height 33''~41.3'' / 84~105cm
- G - Handlebar Width 26.8'' / 68cm
- H - Standover Height 29.5'' / 75cm
- I - Bottom Bracket Height 12.6'' / 32cm
FAQS
HERALD comes about 95% assembled, there are some final assembly and adjustments needed, like the front wheel, the handlebar, the seat, the pedals, the headlight and the front fender.
About the front fender and the headlight--
The screws and nuts are attached on the front fork, you can remove them, put the fender on and screw them back. Two sets are on both sides of the fork, one set on top is for both the fender and the headlight. Here is a guide video about how to install them:
https://www.youtube.com/watch?v=jNii5YfIxEc
For any assembly questions, you can download the instructions on our website https://senadabikes.com/pages/tools or contact our support team via contact@senadabikes.com
The red button below the throttle is to enable/disable the throttle function.When the throttle function is off, code E08 will show on the display, and only PAS mode is functioning; when the throttle function is on, both throttle and PAS are working.https://www.youtube.com/watch?v=wT_9conxWdI
The front wheel hardware are pre-installed on the front hub, a video about how to install the front wheel on SABER/HERALD.
1. Look for the “L” or “R” sign on the axle or wrench flat.
2. The left pedal needs to tighten counterclockwise, the right pedal is tightened clockwise.
3. The thread of the pedal and crank arm needs to be aligned carefully, if the thread is misaligned, the crank will be mangled or cross-threaded.
4. It is suggested to tighten the pedals with a pedal wrench, and use some anti-seize compound.
(1) Long press UP and DOWN button to enter the settings mode; (2) short press M to P02 - Unit of mileage; (3) short press UP and DOWN to change parameters between 0 and 1, 1 is mile; (4) long press M to save the valve; (5) long press UP and DOWN to exit. Here is a guide video of How to change the mileage unit on SABER:https://www.youtube.com/watch?v=wYoiU3cEIb8
Long press "∧" button near the left handlebar.
SABER/HERALD just has one set of key, it is used to lock/unlock the battery:
https://www.youtube.com/watch?v=zh4ifVKux_M
The key set has two same keys, we suggest you keep one on each at home just in case.
Please visit FAQ section to get more answers or solutions, or, you can ask Senada support team directly at contact@senadabikes.com.